Light patches on a black screen can mean two very different things. Backlight bleed is a build fault, while IPS glow is a normal trait of a common type of panel.
Both show up on LCD screens, which use a backlight behind the pixels. OLED screens make their own light, so they have neither.
What is backlight bleed?
Backlight bleed is light leaking around the edges of the panel, where the layers are not pressed together evenly. It shows as bright patches or streaks along the edges or in the corners.
It comes from how the panel was assembled, so it stays in the same spot and looks the same from any angle.
What is IPS glow?
IPS glow is a soft haze in the corners of IPS panels, seen when you look at a dark screen from an angle. It can look silver, warm or slightly blue.
It is a side effect of how IPS panels handle light, not a fault. It changes as you move your head and fades as you sit further back.
How to test
- Dim the room and let your eyes adjust for a minute.
- Set the brightness to your usual level. Maximum brightness exaggerates both effects.
- Open the black screen or the Backlight bleed pattern in the monitor test, and go full screen.
- Sit where you normally sit and look at the edges and corners.
- Move your head left, right, up and down, then lean back.
If a patch stays fixed and looks the same as you move, it is backlight bleed. If it shifts, grows or fades as you move, it is IPS glow.
How to tell them apart
| Backlight bleed | IPS glow | |
|---|---|---|
| Where | Along the edges, often in patches | In the corners |
| When you move your head | Stays the same | Shifts, grows or fades |
| When you sit back | Still visible | Fades |
| Cause | Uneven assembly or pressure on the panel | Normal for IPS panels |
| Is it a fault? | Yes, when it is strong | No |
Do not trust a photo
Phone cameras brighten dark scenes, which makes any glow or bleed look far worse than it is. Judge with your own eyes.
If you need a photo for a return, lower the camera's exposure until the picture matches what you see.
How much is normal?
A little bleed is common on LCD screens, especially in a pitch black room. The real test is normal use.
Watch a dark movie scene or play a dark game at your usual brightness. If the bleed distracts you there, it is worth returning the screen.
What to do about it
Return or exchange the screen within the store's return window if the bleed bothers you. A replacement panel may be much better.
Some people press on the bezel or loosen screws to reduce bleed. This can crack the panel, cause new marks and void the warranty, so we do not recommend it.
For IPS glow, sit a little further back, raise the room lighting slightly and keep the screen centered in front of you.
Checking a new screen? Run through our new monitor checklist to catch every common fault early.