This free radar screen turns any display into a glowing scope. A bright sweep line circles the center and leaves a fading trail, and targets light up as the beam passes over them.
It runs full screen in your browser with no app needed.
Inside the scope
Four range rings and a crosshair divide the circle, with bearing marks every 10 degrees and numbers every 30. Each target carries a TGT code and drifts slowly, so blips shift between sweeps.
Readouts in the corners add to the effect: range, the current sweep bearing, a target count, the mode and a live clock taken from your device.
Adjust your radar screen
- Sweep speed goes from 0.5x to 2x.
- Targets sets anywhere from 0 to 15 blips.
- Green, Amber or Blue changes the color of the whole display.
- Ping sound plays a soft tone once per full rotation. It starts off, so tap it when you want audio.
Full screen and exit
Press Open full screen or hit F. To leave, press Esc or use the Exit full screen button that shows up when you move your pointer.
Ways to use it
It makes a great prop for a film set, an escape room or a submarine themed party. It also suits a gaming setup, a stream backdrop or a spare monitor in a home office.
Turn the ping on for a quiet, rhythmic sound in a dark room. Set Targets to 0 if you just want the sweep with no blips.
Build a full control room by running the matrix screensaver or the hacker screen on a second display.
The page does not stop your device from sleeping, so raise the screen timeout in your settings before a long session.